Regviz

Espressif Systems /ESP32 /IO_MUX /GPIO17

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as GPIO17

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/Espressif Systems/ESP32/IO_MUX/GPIO17#0x0

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (MCU_OE)MCU_OE 0 (SLP_SEL)SLP_SEL 0 (MCU_WPD)MCU_WPD 0 (MCU_WPU)MCU_WPU 0 (MCU_IE)MCU_IE 0MCU_DRV 0 (FUN_WPD)FUN_WPD 0 (FUN_WPU)FUN_WPU 0 (FUN_IE)FUN_IE 0FUN_DRV 0MCU_SEL

Fields

MCU_OE

Output enable of the pad in sleep mode. 1: enable output; 0: disable output.
SLP_SEL

Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode.
MCU_WPD

Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled.
MCU_WPU

Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled.
MCU_IE

Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled.
MCU_DRV

Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength.
FUN_WPD

Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0.
FUN_WPU

Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0.
FUN_IE

Input enable of the pad. 1: input enabled; 0: input disabled.
FUN_DRV

Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet.
MCU_SEL

Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc.

Links

()

Register License

Copyright 2024 Espressif Systems (Shanghai) PTE LTD

Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

 ()

Register Reference

https://github.com/cmsis-svd/cmsis-svd-data